How do fit bubblewrap to an aluminium greenhouse ?

The reason I ask now, is that I'll soon be erecting a GH which I managed to dismantle over the weekend.

By chance I saw that you can hang hanging baskets to hooks fitted to the roof struts, as long as there are bolts in the groove, to which brackets can be fixed. I can obviously add a few bolts to the grooves before putting the roof on.

With this in mind, I am sure I could do the same in the main vertical struts, which I assume would make fitting bubblewrap easier.

Basically, if I fit bolts everywhere before I reassemble the GH, I'll make my life easier in the future ... won't I ?

 

I bought mine off ebay, you can get them for the corners aswell.

 

There are different quality ali plugs and some are not as strong as others and can snap when twisting.
Depending on the size of your greenhouse, you may be limited to the number of hanging baskets you can hang from the roof, they add quite a weight.

 

I use these, on every glazing bar, and then fix a wire between them as a cropping wire.

 

Other than "hoppydoopy bolts"?

"Cropped headed bolt & ring" perhaps?

This I got mine here - 60p each
http://www.greenhousewarehouse.com/sp-nutboltringx10-greenhouse-nut--bolt-and-ring-set-(10).html

Jungle Jane made her own
http://gardenerscorner.co.uk/forum/...house-bolts-and-rings-fixings-supports.49273/

 

I drilled through each end of the greenhouse at the apex and the top of each side
Fitted hooks, and then just use curtain wire (as in net curtains)

Jack McH