Improving the soil

Discussion in 'Compost, Fertilisers & Recycling' started by Sargan, Dec 3, 2016.

  1. Sargan

    Sargan Gardener

    Joined:
    Sep 17, 2010
    Messages:
    212
    Gender:
    Male
    Location:
    South Wales
    Ratings:
    +34
    This is not really about compost - bet seemed most appropriate sub-forum.


    I have very bad ground .... it was a site that was built up by over 20' back in 30's to become a railway sidings .... what they built it up with is steel works slag & subsoil from nearby A road they were digging through a hill.
    Disused since 60's it became eventually a SelfBuild site.

    For my main veg plots I built up high raised beds and imported soil ... and over a couple of years with loads of manure & sharp sand have got this to good condition and very fertile.

    But for borders and ground level beds ... although I dug out the 'sub soil' to a depth of 24' and put in imported soil it is very heavy - with high clay content, gets waterlogged.

    Due to established plants SWMBO won't let me rotovate it so mass addition of anything is not an option.
    I have come up with a plan B

    I bought a hand operated 4" diameter Auger ... and have the idea that in the very waterlogged parts - every 2' or so will bore put a 4" hole around 2' deep and fill it with sharp sand ... and top the last 2" with good loam.

    Physically tried it and it bores the holes easily.

    My thoughts being 2 fold ... vertical drainage will allow (by hydrostatic pressure) water to seep into the sand filled 'tubes' and help drain the ground.

    and secondly over time the sand will mix in with soil by worm action etc. ,,, and improve the soil.



    Anybody see any issues with this …. And maybe any improvement …. maybe something other than just sharp sand into the holes ?







    [RH1]
     
    • Like Like x 2
    • Phil A

      Phil A Guest

      Ratings:
      +0
      Good plan :)

      Maybe alternate the holes with grit? Would stay in place a bit longer than sand on its own :)
       
      • Like Like x 1
      • Sargan

        Sargan Gardener

        Joined:
        Sep 17, 2010
        Messages:
        212
        Gender:
        Male
        Location:
        South Wales
        Ratings:
        +34
        Not sure what you mean by grit ? sharp sand is a grit ...
        what sort if mesh size do you mean?
         
      • Phil A

        Phil A Guest

        Ratings:
        +0
        Sorry, I meant 10mm gravel :)
         
      • Sargan

        Sargan Gardener

        Joined:
        Sep 17, 2010
        Messages:
        212
        Gender:
        Male
        Location:
        South Wales
        Ratings:
        +34
        I have a tonne bag of 10mm here ... could mix it with sharp sand
         
      • Phil A

        Phil A Guest

        Ratings:
        +0
        You could start a small landscaping business with that much :)
         
        • Agree Agree x 1
        • Sargan

          Sargan Gardener

          Joined:
          Sep 17, 2010
          Messages:
          212
          Gender:
          Male
          Location:
          South Wales
          Ratings:
          +34

          I just used 3 tonne of 10mm and 2 tonne of sharp sand in a land drainage job in another part of the site. Installed drainage crates and French drain herringbone collection array.
           
          • Like Like x 2
          Loading...

          Share This Page

          1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
            By continuing to use this site, you are consenting to our use of cookies.
            Dismiss Notice