Help!!! I'm new to all this. A complete novice

Discussion in 'Greenhouse Growing' started by Spacemunkey, Feb 4, 2017.

  1. Sheal

    Sheal Total Gardener

    Joined:
    Feb 2, 2011
    Messages:
    35,546
    Gender:
    Female
    Location:
    Beauly, Inverness-shire. Zone 9a
    Ratings:
    +52,317
    Don't forget you've got to get it through the house door @Spacemunkey :)
     
    • Like Like x 2
    • Agree Agree x 1
    • Spacemunkey

      Spacemunkey Gardener

      Joined:
      Feb 4, 2017
      Messages:
      146
      Gender:
      Male
      Occupation:
      Steel worker
      Location:
      Port Talbot
      Ratings:
      +270
      Ha ha yes I realised that once I started to piece it together. I assembled the sides then started to assemble the rear section and as I was looking, it dawned on me that it would never get through my patio doors. I gave up and I'm going to start again on Sunday when I have a day off

      :rasp:
       
      • Like Like x 2
      • Friendly Friendly x 1
      • waylannder2002

        waylannder2002 Apprentice Gardener

        Joined:
        Feb 16, 2017
        Messages:
        16
        Gender:
        Male
        Occupation:
        transport
        Location:
        ireland
        Ratings:
        +21
        Hi ive got a old greenhouse at the end of my garden, every pane of glass is a different size, metal frame, i think i have to take out all the glass and grind the frame and paint it, glass is very expensive to replace , could I just replace with lenghts of corrugated sheets? or would someone suggest something else?
        thanks colin DSC_0002.JPG
         
        • Like Like x 3
        • ARMANDII

          ARMANDII Low Flying Administrator Staff Member

          Joined:
          Jan 12, 2019
          Messages:
          48,096
          Gender:
          Male
          Ratings:
          +100,834
          That's a fairly big job you've got there;) I would take out, carefully, the good panes of glass and save them. Even plastic twin walled sheets are not going to be inexpensive so I would perhaps think about using the old glass as much as possible in one area of the Green House even if the sizes are different. Plastic sheeting is fine but the bigger the area the more wind resistance there is, so they need to be securely fixed with maybe diagonal struts across the sheet to stop them blowing inwards. Quite a few of our members has plastic paned Green Houses so they may be able to advise you with the benefit of their experience.:coffee::snorky:
           
          • Agree Agree x 2
          • Spacemunkey

            Spacemunkey Gardener

            Joined:
            Feb 4, 2017
            Messages:
            146
            Gender:
            Male
            Occupation:
            Steel worker
            Location:
            Port Talbot
            Ratings:
            +270
            Ahhhhhh:scratch: I've built the sides, front and rear sections and OMG!! It's so difficult to fix together. My Dad was supposed to help but he couldn't be here today to help so I've tried to do it myself. It's impossible with only one pair of hands. I'm going to try again tomorrow with a helping pair of hands... cheers Dad your amazing
             
            • Informative Informative x 1
            • ARMANDII

              ARMANDII Low Flying Administrator Staff Member

              Joined:
              Jan 12, 2019
              Messages:
              48,096
              Gender:
              Male
              Ratings:
              +100,834
              I built my Green House in the freezing snow with my life long Pal and even then it took two days to do it.........you definitely need that extra pair of hands.:snorky:
               
              • Agree Agree x 1
              • Informative Informative x 1
              • Spacemunkey

                Spacemunkey Gardener

                Joined:
                Feb 4, 2017
                Messages:
                146
                Gender:
                Male
                Occupation:
                Steel worker
                Location:
                Port Talbot
                Ratings:
                +270
                I've almost finished erecting my greenhouse but I've run out of bead!!!!
                 

                Attached Files:

                • Like Like x 3
                • ARMANDII

                  ARMANDII Low Flying Administrator Staff Member

                  Joined:
                  Jan 12, 2019
                  Messages:
                  48,096
                  Gender:
                  Male
                  Ratings:
                  +100,834
                  [​IMG]
                   
                  • Funny Funny x 1
                  • Spacemunkey

                    Spacemunkey Gardener

                    Joined:
                    Feb 4, 2017
                    Messages:
                    146
                    Gender:
                    Male
                    Occupation:
                    Steel worker
                    Location:
                    Port Talbot
                    Ratings:
                    +270
                    I'll repost.... I've run out of neoprene window beading lol
                     
                    • Like Like x 1
                    • CanadianLori

                      CanadianLori Total Gardener

                      Joined:
                      Sep 20, 2015
                      Messages:
                      9,687
                      Occupation:
                      Battle Axe
                      Location:
                      Oakville, Ontario, Canada Zone 5A
                      Ratings:
                      +30,478
                      Those look likd the beads I got in New Orleans :heehee:
                       
                      • Like Like x 1
                      • Funny Funny x 1
                      • ARMANDII

                        ARMANDII Low Flying Administrator Staff Member

                        Joined:
                        Jan 12, 2019
                        Messages:
                        48,096
                        Gender:
                        Male
                        Ratings:
                        +100,834
                        Have you still got them, Lori:heehee:
                         
                        • Funny Funny x 1
                        • CanadianLori

                          CanadianLori Total Gardener

                          Joined:
                          Sep 20, 2015
                          Messages:
                          9,687
                          Occupation:
                          Battle Axe
                          Location:
                          Oakville, Ontario, Canada Zone 5A
                          Ratings:
                          +30,478
                          Yup. And I'm not telling how I got them :)
                           
                          • Funny Funny x 1
                          • CanadianLori

                            CanadianLori Total Gardener

                            Joined:
                            Sep 20, 2015
                            Messages:
                            9,687
                            Occupation:
                            Battle Axe
                            Location:
                            Oakville, Ontario, Canada Zone 5A
                            Ratings:
                            +30,478
                            That's interesting how you put the entire frame together before installing the glass. The frames look very similar to the ones in my palram however the steel has channels that run the length of the piece.

                            These polycarbonate ones need the lower frame and sides are put together and the panels slid down into the channels before assembling the roof frame. That is why I was trying to get around putting the louvres in one of the sides - I would need to take the whole roof off to do it.

                            Are you going to be using some kind of clip to hold the glass in place?
                             
                            • Like Like x 1
                            • Spacemunkey

                              Spacemunkey Gardener

                              Joined:
                              Feb 4, 2017
                              Messages:
                              146
                              Gender:
                              Male
                              Occupation:
                              Steel worker
                              Location:
                              Port Talbot
                              Ratings:
                              +270
                              Hi Lori, yes the glass is held in position with clips and there is a rubber seal on the inside of the glass. I'm planning on glazing the frame tomorrow :yes:
                               
                            • CanadianLori

                              CanadianLori Total Gardener

                              Joined:
                              Sep 20, 2015
                              Messages:
                              9,687
                              Occupation:
                              Battle Axe
                              Location:
                              Oakville, Ontario, Canada Zone 5A
                              Ratings:
                              +30,478
                              Can hardly wait for the next pics. :blue thumb:
                               
                              • Like Like x 1
                              Loading...

                              Share This Page

                              1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
                                By continuing to use this site, you are consenting to our use of cookies.
                                Dismiss Notice